![]() |
+44(0) 113 257 9092 |
![]() |
info@ar-industries.com |
Tel : +44(0) 113 257 9092
Email : info@ar-industries.com
Using the right technology, chemical stripping can be both very efficient and low cost. At the same time we can achieve good environmental standards without damage.
Water-based chemicals are used to release the coating from the part at around 80 C.
We use environmentally friendly chemicals to safely strip temperature sensitive parts
in a heated tank. No caustic or solvents.
The technology from Envirostripp achieves a combination
of long life length of the chemicals with high efficiency.
This results in a high repeatability which is one of the most important aspects in order to set up a
continuous high frequency cleaning process.
The parts are immersed or placed in a spray installation with the cleaning chemicals. After a certain time
depending on type of paint system, amount of paint and underlying surface, the parts are rinsed
with water. Usually high pressure water is recommended in order to achieve high efficiency with
low consumption of water.
We can provide products for most substrates, without any detrimental effect on the part, ensuring
tolerances, with good environmental properties and in many cases with a non VOC classification.
Before
After